1 / 3
UNO minimalista multicoloured card box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This UNO Card Box with multicoloured logo is based on the UNO Card Box by Markus_p.
This edition comes with 112 cards printed on slightly thicker material than the original, as such I needed to make the bottom case and inner card holder slightly (5.5mm to be precise) deeper. Inspired by this model, but didn't want to add that much depth, so did it myself.
The inner card holder can be glued in place. Note that the beveled side should be at the front. The box will not close properly if the card holder is glued the other way around. Test before gluing.
For the hinges you will need 6x additional M3x30mm screws.
Filament used:
- Prusament PETG Black
- Prusament PETG Jungle Green
- add:north PETG Red
- Prusament PETG Mango Yellow
- Prusament PETG Ultramarine Blue Transparent