Carp Fishing Swinger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This carp swinger fits on anay bankstick or rodpod and will help you as a bite indicator.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 103
- Makes
- 0
- Views
- 1,885
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
this is my diy carp swinger. I use four of them and they work pretty good. Printed the parts with PETG.
Here the overview of the non-printed parts:
threaded rod M4, circa 180mm
2x M4 nut
2x M4 washers
ball bearing 8x19x6 mm
coil spring 4,3x7mm (for the line release)
ball bearing ball d=4,7mm (for the line release)
2x threaded inserts M4, i used this https://www.amazon.de/Gewindeeinsatz-Gewindebuchsen-Einpressmutter-Kunststoffteile-Ultraschall/dp/B07YSV66Y5/ref=sr_1_1_sspa?adgrpid=70746402923&gclid=CjwKCAiAtouOBhA6EiwA2nLKH0h6_cB1f6gD27CpiO7tg8y2BLzMGKU6md2nqAq2mG2RrX06ndjqpRoC-ogQAvD_BwE&hvadid=352777921835&hvdev=c&hvlocphy=9042169&hvnetw=g&hvqmt=e&hvrand=8518151792557419044&hvtargid=kwd-854957486145&hydadcr=18274_1833706&keywords=ruthex+gewindeeinsatz+m4&qid=1640244310&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFZNTdUSUs4Uk8wTEcmZW5jcnlwdGVkSWQ9QTAyODAzODVSN1FWTjdBNE00U1gmZW5jcnlwdGVkQWRJZD1BMDc3NTMxODM1UDlWRUJPNlRFWEsmd2lkZ2V0TmFtZT1zcF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
the weight on the rod is made of brass 20x20m