Anko Tablet Holder Arm Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extends the arm of the Anko Tablet Holder into the middle between the two car seats.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 29
- Makes
- 0
- Views
- 609
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Anko Car Tablet Holder Extension Arm
The original tablet holder is really only good for the child directly behind that seat, I created this arm so that both kids could watch at the same time. The only additional component you'll need is an m3 screw and nut or a cable tie if you're feeling lazy. Due to road vibrations i didn't bother with 3D printing a screw and nut, didn't think it'd last very long.
Print Settings:
Layer Height @ 0.3mm (you can do less but honesly it still looks good at this thickness)
Infill @ 50% Rectilinear (again you could do less but it isn't much difference in spool use)
Make Info
Printer: Elegoo Neptune 4 Pro
Used Filament: 38.26 grams, 12.83 meters
Print Time: 51 minutes