Anko Tablet Holder Arm Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extends the arm of the Anko Tablet Holder into the middle between the two car seats.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Anko Car Tablet Holder Extension Arm
The original tablet holder is really only good for the child directly behind that seat, I created this arm so that both kids could watch at the same time. The only additional component you'll need is an m3 screw and nut or a cable tie if you're feeling lazy. Due to road vibrations i didn't bother with 3D printing a screw and nut, didn't think it'd last very long.
Print Settings:
Layer Height @ 0.3mm (you can do less but honesly it still looks good at this thickness)
Infill @ 50% Rectilinear (again you could do less but it isn't much difference in spool use)
Make Info
Printer: Elegoo Neptune 4 Pro
Used Filament: 38.26 grams, 12.83 meters
Print Time: 51 minutes