Sonoff Environment Sensor Dry Box Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the Sonoff SNZB-02D that mounts to the inner wall off a clear filament dry box.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The specific dry boxes I use for filament are difficult to look into from some angles, and I was sick of looking at an app every single time I wanted to know what the humidity was in the dry box. This will allow you to mount the Sonoff SNZB-02D environment sensor to the inner wall of the dry box, and allow easier viewing of the temperature and humidity. Designed to be mounted using a “medium” sized 3M Command Strip, but any double sided tape will do.
Sensor available here on Amazon, and cheaper on AliExpress.
There is one decent overhang, but it's not difficult to print.
Layer Height: 0.2mm
Support: No
Infill: At least 10%, not too much is needed.
Filament: Any, I used PETG