Plate/Adapter/Carriage Combo. Fits @NeedItMakeIt linear rails kit for Ender 3 V3 SE & KE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plate/Adapter/Carriage for @NeedItMakeIt linear rails kit. Ender 3 V3 SE & KE. Print on 220x220 bed. MGN12C or MGN12H
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 188
- Makes
- 2
- Views
- 1,873
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Latest UPDATE (24-07-15) Tested.
From 966 grams down to 337 grams!
I just added a 3rd version (07-24-24)
Save a tone of weight and parts. Print this 3-in-1 plate/adapter. Mounts directly on the rails slides. Build plate mounts directly on top.
Printable on 220x220 build-plate. I printed with 0.6mm nzl. Anything will work really.
3mm walls, 3mm top, 3mm bottom. Infill no more than 20%.
-If on Cura, use Exclusive mode. Print outer walls very slow (20-25mms).
-You NEED supports ON because the center part, where the belt is attached to, has to be inset 4mm up from the bottom.
-PETG or Tougher
-Your threadserts have to be flush at the top. They can stick out the bottom but no more then 1mm. Mine were longer so I had to shave them a little.
Let the build plate and finished model cool down all the way before removing, you really dont want to distort it at all.
threadserts kit: https://www.aliexpress.com/item/1005006076276418.html
rails: https://www.aliexpress.com/item/1005003457576248.html
button head (M3 & M4): https://www.aliexpress.com/item/1005004833515587.html