SPECTRUM 53mm Center Disc
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prints with 0.1mm layer height, Rectilinear infill 40%, print as set of 2x
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SPECTRUM Filament Spool adapter.
My own design, made to fit the Miklós Kiszely Bambu Lab P1/X1/X1C/X1CC Filament Spool Winder
The original filament spools have too wide a center diameter, so when they put 1kg filament onto the spool, the filament go all the way to the filament AMS feeder, preventing the spool from rolling the AMS.
Only option is to transfer the filament to a spool with a smaller inner diameter so that you can
print using the AMS, as printing PETG from the external spool holder is just silly. :)
Designed in Fusion 360
Prints with 0.1mm layer height and standard settings otherwise on the bambu.
For use, you need to print it in 2x , one for each side.
Best regards.
Bård