1 / 6
Brackets for Lucky Reptile ThermoControl Pro II
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets to mount power supply and sockets to the wall.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I bought multiple of Lucky Reptiles thero control pro II for my terraria and wanted to mount everything to the side wall of the terraria. Therefore I designed bracktes for the PSU and the socket box.
Each bracket is labeled, due to different heights, the socket bracket also has cutout for bigger plugs.
I used PLA and it worked fine, supports are needed, I would also reccomend printing upright to increase durability on the mounting holes.
The mounting holes are designed for 3.5x16mm wood screws, every similar screw should be fine.