1 / 6
Brackets for Lucky Reptile ThermoControl Pro II — zdjęcie 1
1 / 6

Brackets for Lucky Reptile ThermoControl Pro II

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Brackets to mount power supply and sockets to the wall.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

I bought multiple of Lucky Reptiles thero control pro II for my terraria and wanted to mount everything to the side wall of the terraria. Therefore I designed bracktes for the PSU and the socket box.

Each bracket is labeled, due to different heights, the socket bracket also has cutout for bigger plugs.

I used PLA and it worked fine, supports are needed, I would also reccomend printing upright to increase durability on the mounting holes.

The mounting holes are designed for 3.5x16mm wood screws, every similar screw should be fine.

 

Tagi