Danby / Midea AC Hose Wall Port Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to take the exhaust hose of a Danby or Midea dual hose AC and securely vent it out a wall port
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 687
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a quick adapter I made to take the exhaust hose from my Danby dual hose AC and vent it out the wall port in my apartment. Use a cut section of ½" foam insulation in the ring to help seal the adapter in the wall port.
This is meant for the Danby/ Midea portable AC units with the dual hose where the exhaust hose is inside the intake hose. This might work on other AC units, but I haven't tested, so the size and/ or the locking geometry might not line up. You'll need to print with supports on the 4 locking sections on the bottom. I'd recommend a material like PETG or ABS for the higher temperature resistance compared to PLA.
I've also included my Solidworks file just in case you wanted to modify this to work with a different wall port or AC hose, or just to adjust the fit slightly to make it more/ less tight.