Danby / Midea AC Hose Wall Port Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to take the exhaust hose of a Danby or Midea dual hose AC and securely vent it out a wall port
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a quick adapter I made to take the exhaust hose from my Danby dual hose AC and vent it out the wall port in my apartment. Use a cut section of ½" foam insulation in the ring to help seal the adapter in the wall port.
This is meant for the Danby/ Midea portable AC units with the dual hose where the exhaust hose is inside the intake hose. This might work on other AC units, but I haven't tested, so the size and/ or the locking geometry might not line up. You'll need to print with supports on the 4 locking sections on the bottom. I'd recommend a material like PETG or ABS for the higher temperature resistance compared to PLA.
I've also included my Solidworks file just in case you wanted to modify this to work with a different wall port or AC hose, or just to adjust the fit slightly to make it more/ less tight.