Double closed-end wrench (M8 and M12)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple wrench for M8 and M12 bolts and nuts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Basic closed-end wrench for M8 and M12 hex bolts and nuts.
This wrench was initially designed as an assembly tool for a demonstration rack at my place of work, which had to be lightweight for travel and provide simplicity of use by any person that has to work on that rack. A high tightening torque is not required there, so this tool is more than enough to substitute heavy metal wrenches and ratchets.
I printed it with PETG, with 4 walls and 10% infill in the handle. The sockets of the wrench are printed with 100% infill.
If you are looking to have sturdier sockets, probably PLA is a better option.
Your thoughts and feedback are welcome.