Double closed-end wrench (M8 and M12)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wrench for M8 and M12 bolts and nuts.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Basic closed-end wrench for M8 and M12 hex bolts and nuts.
This wrench was initially designed as an assembly tool for a demonstration rack at my place of work, which had to be lightweight for travel and provide simplicity of use by any person that has to work on that rack. A high tightening torque is not required there, so this tool is more than enough to substitute heavy metal wrenches and ratchets.
I printed it with PETG, with 4 walls and 10% infill in the handle. The sockets of the wrench are printed with 100% infill.
If you are looking to have sturdier sockets, probably PLA is a better option.
Your thoughts and feedback are welcome.