Bicycle Fork Wrench (Preloader Wrench)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.66 – €0.81 net (excluding VAT)
For file: BikePreloaderWrench_0.3mm_PLA_MK3S_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.74 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 39 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A tool used to remove the preloader from the shock tube of a bicycle fork.
- Rating
- 4.667 / 5
- Likes
- 31
- Downloads
- 179
- Makes
- 4
- Views
- 540
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A tool used to remove the preloader from the shock tube of a bicycle fork. I decided to do some maintenance on my shocks and didn't have the tool I needed for it.
This was one of those situations where my alternatives were buying a $10 part and waiting for 2-3 days to get it delivered to me, or getting one from a local bike shop for $65. 3D-printing one for about $0.25 and waiting about 40 minutes to get it was the correct answer.
---
NOTE: This is for removing the preloader; not for adjusting it.
This should fit most generic bikes, but double check before printing. The clearance on this part is 0.15mm, so also make sure your printer is well-calibrated, or scale the tool accordingly.