Huina 1550 "5 Finger" Rake
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Huina 1550 excavator "5 finger" rake. REQUIRES my quick coupler OR the screw-cylinder mod.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 127
- Makes
- 0
- Views
- 799
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Huina 1550 excavator "5 finger" rake.
- REQUIRES my quick coupler OR the screw-cylinder mod.
There is no square hole in this to drive it from the stock bucket motor !
Requires (1x) M4x45 bolt and nut to make the front attachment pins.
The rear one will be removed and reused from the "quick coupler".
Quick Coupler : https://www.thingiverse.com/thing:3723652
Screw-Cylinder mod : https://alexnld.com/product/huina-metal-strength-main-arm-second-arm-bucket-arm-driving-rod-for-rc-excavator-rc-car-parts/The two 3mm holes that go through the entire rake are made to insert M3 bolts for rigidity.
You could also use some kind of metal rod glued in there.
I will use 2 pieces of all-thread m3 rod with a nylock nut at each end.
Print instructions
Category: R/C Vehicles