Huina 1550 "5 Finger" Rake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Huina 1550 excavator "5 finger" rake. REQUIRES my quick coupler OR the screw-cylinder mod.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 797
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Huina 1550 excavator "5 finger" rake.
- REQUIRES my quick coupler OR the screw-cylinder mod.
There is no square hole in this to drive it from the stock bucket motor !
Requires (1x) M4x45 bolt and nut to make the front attachment pins.
The rear one will be removed and reused from the "quick coupler".
Quick Coupler : https://www.thingiverse.com/thing:3723652
Screw-Cylinder mod : https://alexnld.com/product/huina-metal-strength-main-arm-second-arm-bucket-arm-driving-rod-for-rc-excavator-rc-car-parts/The two 3mm holes that go through the entire rake are made to insert M3 bolts for rigidity.
You could also use some kind of metal rod glued in there.
I will use 2 pieces of all-thread m3 rod with a nylock nut at each end.
Print instructions
Category: R/C Vehicles