Counting matching models…
This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…
Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…
This is a blade/plow for my 3D printed Huina Undercarriage Needs a N20 geared motor with M4x55 thread, about 200 rpm for best torque Requires my complete Undercarriage, will not fit the stock one !…
Huina 550 / 1550 Undercarriage Spring tensioner Bearing rollers More ground clearance under the center section (about 30mm instead of 8mm stock) Fits stock Huina track gearboxes (a little plastic snipping required only) Fits stock Huina…
Spring-loaded coupler compatible with the Huina 550 / 1550 or 580 V5 has more clearance added for the bucket, lock and bolts parts. Shouldn't need much filing/sanding. Also added a bevel to make hooking a bucket easier. If V4 worked fine…
Huina 1550 Progressive Link Thumb Your choice of : Short : Use without a quick coupler or for a shorter thumb Long : Use with the quick coupler Not compatible with stock square drive Not compatible with stock remote Not compatible with…
Cabin Bars / Grill / Protector for Huina 1550 Either print in 8 parts (print_7 and print_1) or the complete thing. Glue together the 8 parts then double-side sticky tape the grill to the cabin. V2 fixes a tolerance issue around the bottom…
Bucket push rods for your Huina 1550 This allows more angle of the bucket if used in addition to my other mod here : https://www.thingiverse.com/thing:3723652 Print one of each part except (2x) horizontal_v1 The cylinder_spacer is made to…
Huina 1550 excavator "5 finger" rake. REQUIRES my quick coupler OR the screw-cylinder mod. There is no square hole in this to drive it from the stock bucket motor ! Requires (1x) M4x45 bolt and nut to make the front attachment pins. The…
Huina Excavator Electric Coupler * Use the 580_ labeled files for the 580 / 1580 v1 v2 v3 v4 UPDATE Someone made a printable lead screw version for use with "D-shaft" N20 motors. "Electric_LEAD_Lock.stl" "LEAD_Screw.stl" ! Thanks to m.…
Here is my first concept of a "quick coupler" for my new Huina 1550 :D This is for a stock Huina without mods ! For the moment, it is a manual coupler, meaning you have to remove 1 bolt to detach the bucket. You can make yourself a 3mm…
Snow/grading bucket with the proper Huina 1592 pins. Either my first Huina print was wrong or they aren't universally set pins printed in black PETG and used during the winter. held up well.
Design: https://cad.onshape.com/documents/5ea1bad7d58eb133543db8f4/w/2911d5b373cc54b2ba982e76/e/c1821844de435ce1a8fc9415?renderMode=0&uiState=68b0c55711b99720e3533587
Replacing arms for Huina 1520 1:18 toy excavator
One tooth larger drive sprocket to compensate for track stretch. Also includes a taller tooth to prevent track slipping
this bucket is so you can excavate in sand/water so sand/water will fall through leaving rocks/mud inside
this is so you can make a flat surface
Used with Huina 1593, should be compatible with Huina 1550 and above, I think, maybe, let's see. You may need the quick coupler linked below. Compatible with: https://www.printables.com/model/9519-huina-550-1550-580-spring-coupler-remix…
For use with the servo screw actuators and metal arms. Designed to allow full curl and reach. Note: Does not activate over travel sensors shown in picture.
