1 / 2
Huina Excavator Blade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a blade/plow for my 3D printed Huina Undercarriage Needs a N20 geared motor with M4x55 thread, about 200 rpm…
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 230
- Makes
- 1
- Views
- 1,853
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a blade/plow for my 3D printed Huina Undercarriage
- Needs a N20 geared motor with M4x55 thread, about 200 rpm for best torque
- Requires my complete Undercarriage, will not fit the stock one !
Requires a modified remote for the additional channel,will not work with stock 550 remote.
- Requires an additional brushed ESC to plug the N20 motor into (10 amp is fine)
- Requires a couple ~2.5mm holes to be drilled and (12x) M3 screws of various lengths
- Added a complete blade if you don't want to print in 2 parts
- UPDATE : New N20_case_half_v2, blade_frame_middle_v2, blade_cylinder and upper_mount_v2
Tested working October 2, 2019 !
Comments / Suggestions welcome.
I got lots of people adding this to their "Warhammer 40k" collections. Not sure why, but this is NOT related to Warhammer. This is a part for a remote controlled toy excavator sold as the "Huina 1550"
Print instructions
Category: R/C Vehicles