Zero Clearance Delta Rockwell Model 34-348
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Zero clearance insert for the Delta Rockwell 10" Contractors Table Saw Model 34-348.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Zero Clearance insert for Delta Rockwell Table Saw Model 34-348 circa 1980's.
Has inserts for 10x4mm magnets to hold in place. Also has holes for set screws to adjust height.
Use the 1/8"-40x3/16" set screws to adjust the level. Once you have it set, remove the set screws and add a few drops of CA glue into the holes to set the magnets in place.
8mm and 7mm thick models provided in both 3mf and stl formats. I found that 8mm was a little proud on mine, thus the 7mm model.
I used pla to prototype, but my final print is petg.