Counting matching models…
Supersonic variable-sweep wing, heavy blended wingbody bomber, Remix of a FMS Model source: http://logic-wizard.art.coocan.jp/fms_e.htm https://en.wikipedia.org/wiki/Rockwell_B-1_Lancer Category: Vehicles
RC Model created by the great Michael G. Hammer (DK). This is my STL-Version of this 80cm Wingspan Model. 3D-Model with gear from Sketchup-3D-Warehouse:…
This is a replacement for the urethane jaws that came with the Rockwell Jawhorse. Replacement jaws were extraordinarily expensive when they could be found. It was almost cheaper to buy a new Jawhorse. This model is based on the following:…
May 22th 2023 update: widened the opening for the handle clip. This is a travel case for Rockwell safety razors 2C, 6C or 6S. It comes in 2 designs: a simple cover, and a version which can hold 3 extra blades. I printed it with no support…
Compact stand for Rockwell 6C or 6S with all its plates. Can be used with razor assembled or completely disassembled. Holes are for water drainage.
I picked up a Rockwell 31-351 1x42 belt sander/grinder for cheap. After purchasing it, I found out that several of the wheels were either broken, missing their tires, or missing completely. These parts are only currently available via…
Gridfinity bin for Rockwell 6C or 6S razors. It's only 1x2 units big and can hold either assembled or complete disassembled razor. Bin was generated by FusionGridfinityGenerator plugin for Fusion 360.
Inspired by Inspired by Henson Razor Stand for Henson AL13. https://cad.onshape.com/documents/71be24faad5eb4f364c26293/w/7f120d130b8bd328b3a89735/e/49e25a6b933550c0807a71c4
Wallholder for rockwell razor. It's a bit difficult to get the razor in at the beginning, but when the razor has been used 20 times it fits perfectly. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 25%…
The Rockwell Advanced Tactical Fighter, ATF, was designed by Dr. Daniel Raymer. Had the plane been built, it would have been capable of supercruising at Mach 1.8! This model features a separate modern looking stand you can print that has…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
I was really satisfied with the cover for my Merkur 34c so I made one for my new Rockwell 6C. This cover fits nicely but not too tightly to avoid trapping water inside the cover as much as possible and can be used with all the plates.
Rockwell B-1B Lancer Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Printable zero clearance inserts for the venerable Rockwell Beaver 9" table saw. Select the insert size appropriate for your blade width: standard table saw blades are 1/8"; the other widths are for dado blade sets. I've included an image…
a holder for the Rockwell 6C or 6S and the unused shave plates.
Rockwell Razor 6 C or 6S and 5 x Straight Razor stand.
Beautiful ATF ConceptJet https://en.wikipedia.org/wiki/Advanced_Tactical_Fighter Category: Vehicles
Replacement insert for old Rockwell 24" scroll saw. This is for my model 40-440 saw. Might fit others. Rockwell part number is LBS-56. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .2mm Infill: 15%…
Zero Clearance insert for Delta Rockwell Table Saw Model 34-348 circa 1980's. Has inserts for 10x4mm magnets to hold in place. Also has holes for set screws to adjust height. Use the 1/8"-40x3/16" set screws to adjust the level. Once you…
Freedom From Want : Norman Rockwell
For original Rockwell RK7320 BladeRunner (not X2) with dust collection drawer (front bottom). This is a 2.5" (female) shop vac hose retrofit kit/adapter to allow a Ridgid vacuum (or other brand with standard 2.5" hose connections) to suck…
Another thrift store find that did not have all parts. The 6mm knob is used on several parts of the machine. It requires a 6mm nut to be glued in. The vacuum attachment was missing. I created one that fits with the approximate size 32mm…
Delta-Rockwell 1 x 42 Grinder/Sander Pulleys/Wheels. These fit the 31-350 & 31-351 models. Drive Pulley - PN: 926-11-991-9441 Rockwell 31-351 Drive Wheel NoTire v6 This is printed as one part, I printed with PLA , 90% infill, supports…
If you knock out the black lugs that hold the old pads in then you can simply bang them back into this model. You won't need the screws/nuts that are in the original model. I printed at 25% for the first go but are fairly soft in PLU.…
Throat plate for a Rockwell Beaver 3300 14inch bandsaw. Category: Machine Tools
This is a custom stand for Rockwell safety razors, created to securely hold your razor upright while keeping your countertop clean and organized. The stand provides stable support, proper airflow for drying, and a compact footprint,…
Cordless tool battery adapter. Xfinity 20v battery to Rockwell Shopseries 12v skins *** you are over volting your tool *** Extra hardware wire 1.5mm female fuse terminal x2 6mm male spade connector x2 M3 x10mm bolt & Hex nut x3 spring, I…
Only use for lost pla casting, if you wish to use with your lathe, please use my remix with the 1/2 threaded rod inset, found in my things. important must print at 100% infill , I am in no way responsible for the use of this arbor, use…
The Rockwell JawStand (see https://piphardware.com/product/rockwell-jawstand/) is a handy piece of gear. Beyond its intended use as a woodworker's sawing support stand, the moderate cost and built-in 90 degree tilt clamp function has made…
New-to-me Rockwell vertical milling machine came without a knee crank. Quick design and 3D print of a crank arm and a modified bicycle pedal to the rescue. Print Settings Printer: Jerry's MakerSlide Rafts: No Supports: No Infill: High for…
Cordless tool battery adapter. Ozito 18v battery to Rockwell Shopseries 12v skins *** you are over volting your tool *** Extra hardware wire 1.5mm female fuse terminal x2 6mm male spade connector x2 M3 x10mm bolt & Hex nut x3 spring, I…
This insert safely holds all the components and drastically speeds up set up time! Quantities are in the file name.
This is a custom stand for Rockwell safety razors, created to securely hold your razor upright while keeping your countertop clean and organized. The stand provides stable support, proper airflow for drying, and a compact footprint,…
Delta-Rockwell 1 x 42 Grinder/Sander Pulleys/Wheels. These fit the 31-350 & 31-351 models. Drive Pulley - PN: 926-11-991-9441 Rockwell 31-351 Drive Wheel NoTire v6 This is printed as one part, I printed with PLA , 90% infill, supports…
Rockwell B-1B Lancer Wall Art Silhouette model. Adjustable size. I accept model suggestions.
I found a fair amount of dust settling in the top (head) of my drill press overtime where the pulleys and belts are located so I created a cover to remedy the problem. *Snap-in fit and easy to remove with two clips on the underside.…
Rockwell razor caddy. Holds new blade, extra size plates, and used blades. Used blade box is separate so you can throw it away when full and print a new one. I printed with 0.4mm nozzle with 0.2mm layers. No supports needed. Recommended…
The stand uses a M22 nut (inox prefered) in order to add weight. Just pause the print to the proper layer and insert the nut while printing. In order to customize the model to your own needs, you can adjust the variables in freecad (its…
I wanted a holder to keep my Rockwell 6C compontents when not in use. I like to keep it disassembled. So I started to make a holder. Only afterwards I checked to see that there already some good designs out there like:…
The bump spool in my Rockwell Line Trimmer has worn through over time, and I can't find a replacement. I decided to model my own version. Below is a link to the model on OnShape so you can remix it as you like. OnShape Model Link Photos…
Makita battery to Rockwell 18v (old Ni-cd) tool Extra requirements 2 x 9.5mm male spade terminals 2 x 6mm long male spade connectors 5x M3 nuts 5 x M3 10mm socket head bolts 2 x wires 35mm long, 5mm diameter, 0.5 gauge spring, clicky pen…
A stylish wall mount/holder designed for the Rockwell 6S and 6C razors. The double-sided tape I used to mount it to the wall is 20mm wide, so the plate is made with that in mind I printed this model with the plate flat on the printer bed,…
This is a replacement bolt head holder for the Rockwell Jawhorse. The original part is circular, but this model is a cut-down version to reduce material. If printed with the hex head side down, it should print without supports on printers…
Needed something to store the spare plates for my Rockwell 6S. I wanted to keep them in the bathroom, so I can change them if I want to. Not a masterpiece, just a quick little print. I was wondering why nobody did something like that…
Case to hold the razor, 4 packs of blades and additional base plates
Replacement plastic cap for vintage Rockwell 150 router. The original plastic cap seems to deteriorate over time. I printed in ASA with 100% infill for durability, but that is probably overkill.
