Pixel 6 Mount for Bike Handlebar
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.78 – €4.62 net (excluding VAT)
For file: Pixel-6_Mount_0.4n_0.2mm_PETG_MINI_4h18m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.20 excluding VAT (range midpoint).
- Weight reported by the author
- 54 g
- Print time reported by the author
- 4.31 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bike mount / holder for Google Pixel 6 with respect of the protective slim case.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 74
- Makes
- 1
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Google Pixel 6 mount for bike handlebar for phones with a case.
Easy slide-in, no obstruction of the screen, angle is adjustable. The phone is fully usable while in the mount.
The rubber case makes a good fit in the mount without the need for an additional top bracket. Let me know if you need a bracket, the STEP files for mods are included.
You will need additionally
- 4x M4 x 16 screws (ISO 7046)
- 4x M4 nuts (ISO 4032)
The assembly CAD file is included in the STEP file folder, self-explanatory for putting together.
Print files for Prusa Mini+ included.
Instructions
- Print in PETG or ASA
- Ideally use 4 perimeters for the clamps
- Install 4 nuts in the top clamp
- Screw on the Pixel 6 mount with 2 screws
- Use a rubber pad between the handlebar and the clamps for a tight fit.
- Tighten the clamps on the handlebar in the desired position with the last 2 screws