Nebula Camera mount for Ender 3 V3 (CoreXZ)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extension arm from the filament sensor forward to a mount for the Nebula camera on the Creality Ender 3 V3 (CoreXZ).
- Rating
- 1 / 5
- Likes
- 32
- Downloads
- 212
- Makes
- 0
- Views
- 1,303
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — NoDerivatives
This model is designed to use the stock hardware and simply screws in on top of the filament sensor using the screws for the filament sensor - stock screws are long enough.
Printed in Creality PLA-Carbon with thick walls and infill >20%. No supports needed. Fits on the build plate at 45 degrees.
Has cable management built in with the USB cable tucking in under the camera and then holes for cable ties to tie the cable to the extension. Cable is long enough to reach the USB port and be tied to the cable going from the base to the gantry.
It blocks the stock cable hook on the gantry so I added a place to zip tie the gantry cable as well as the camera cable for strain relief.
Hope this helps someone!