Split Overflow
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a larger version of my elongated micro overflow.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 48
- Makes
- 0
- Views
- 829
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a larger version of my elongated micro overflow. For several of our tanks, I needed something that could handle a higher volume of water, and that could still feed a centered drain, while straddling a centered air pump. I use 3/8" OD / 1/4" ID tubing for over the wall, and 3/4" OD / 1/2" ID tubing for the drain.
Print instructions
Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 40%
Notes:
I also set 1.2mm thick walls because I've been having trouble on my printer with underextruding, which leads to leaking.
Post-Printing
Just to be safe, I also swabbed the inside of the baskets with a cotton swab coated with aquarium-safe silicone. This is mostly due to my setup having a meltdown and underextruding some surfaces.