1 / 5
Filament guide puley turn your printer chamber into budget drier
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guide your filament anywhere from spool to extruder. Made with using printer chamber as a budget filament drier in mind.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Only additional 2 parts required:
- 12x10 round neodymium magnet
- M3x12mm flat head philips or hex bolt
Use this to drive your filament anywhere from your spool to your extruder. I made this for the idea of using printer chamber with some moisture absorbers as a budget filament drier in mind as it easily heats close to 40°C thus extending filament travel path can theoretically dry it out. Use as many as you need.
- use PETG for more heat resistance and less friction
- 4 perimeters
- extra perimeters if needed
- 6/5 top/bottom solid layers
- 5% infill (I use gyroid)
- pause and insert magnet (I recommend using a screwdriver tip as it will remove some of that huge snap force to bed)
- insert puley and tighten in together
- use for example two sided adhesive tape to prevent driver from sliding and you're done