Internal Overflow Strainer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I use a 1/2" PVC elbow on the inside of my overflow bulkheads.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I use a 1/2" PVC elbow on the inside of my overflow bulkheads. My shrimp think it's a water slide and I usually find them in the sump later.
I started off with a cap style, but if it became clogged, I'd have a spill. So I came up with these, that still provide straining, but if the water gets high enough it will still drain unimpeded.
This style goes inside of a female 1/2" PVC fitting.
Updated 2019-03-29: Added a version where the gaps are smaller to attempt to get small fry from swimming through... (ugh)
Print instructions
Category: Hobby Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%