1 / 3
TPU Spring for Logitech Driving Force Shifter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement spring for the Logitech shifter to make it stiffer, inherently more realistic.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 99
- Makes
- 0
- Views
- 742
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
This entirely replaces the stock spring in the Logitech driving force shifter (G27, G29, & G923 shifters). The print settings are very important as the wrong settings can make it too soft, or too stiff causing the steel ball to pop out of place. Of course you can go lower than these settings if you find my recommendation to be too stiff.
PRINT SETTINGS:
- TPU 95A (I used Overture TPU, any brand is fine.)
- 3D Honeycomb @ 75%
- 1 Wall
- 0.20mm Layer Height
- 0.40mm Nozzle