1 / 6
The Epoxy Mix System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Epoxy Mix System
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 91
- Makes
- 4
- Views
- 332
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was working on a project and needed some mixing cups for epoxy glue.
I didn't have anything around to use, so I decided to create a system I could print and store.
Meet The Epoxy Mixing System
it comes with small mixing trays, and a mixing tool with 2 different ends, one is a spatula for mixing and the other side is pointy for precise glue uses.
The Organizer will hole 3 trays and 4 mixing tools, you can print it in multi-color or single-color.
Print Settings
- Material: PLA
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 2-3
- Infill: 15%
- Supports: None
If you print one, please share your results with us! and happy printing!
Make sure to check our TikTok channel.
