1 / 7
JWST Clock - 2.5in, fastned (Remix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix of BadKitty's model uses 2.5in gold acrylic mirrors and a fastned 3D printed frame to make a JWST clock
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Similar to the original, the idea is to make a JWST shaped clock with reflective gold acrylic mirrors.
Prints:
- 1 X JWST_Clock_Center
- 9 X JWST_Hex_2.5in
Assembly notes:
- There is no need to put a screw in every hole, just use as many as you think is needed to hold it together
- I used 6x3mm screw for the clock center, and around 3x3mm screws to fasten every hex group to the others
- For the acrylic mirrors, I used hot glue to attach them to the hex frame
- At first, it did not stick very well to the smooth backing paper of the mirrors , so I tore off 3 corners per hex and put a drop of glue on each directly on each the exposed 2-sided tape that comes with the mirrors (see pictures).
Materials:
- 2.5" Hexagon Acrylic Mirrors: https://www.amazon.ca/dp/B08NCXVQYQ
- Clock mechanism (the one from the original model should work too): https://www.amazon.ca/dp/B08JLXLJJH
- 3mm screws (as many as you want to use)