1 / 5
Peg Board Basket 1" inch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Peg board (1 inch) basket with small windows in front and rear.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
The pegs print better with support (20% line), but you really shouldn't need support for top oval section of windows. I don't suggest my print speed, I would tone it down to 75mm/s, I had a lot of stringing at this speed.
Basket Specs:
The total depth from front to pegboard is 32mm, and wall thickness is 1.2mm.
| Description | Inner (mm) | Outer (mm) |
| Width | 83.6 | 86 |
| Height | 100 | 102.4 |
| Depth (basket) | 25.6 | 28 |
| Printer Setting | Value |
| Print Speed | 100 mm/s |
| Travel Speed | 150 mm/s |
| Build Plate Temp | 50 C |
| Infill | 20% |
| Fan Speed | 20% |
| Layer Height | 0.20 mm |
| Print Temperature | 220 C |
| Material | Overture PLA |
