1 / 5
Peg Board Basket 1" inch — zdjęcie 1
1 / 5

Peg Board Basket 1" inch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Peg board (1 inch) basket with small windows in front and rear.

Ocena
0 / 5
Polubienia
7
Pobrania
58
Wydruki
0
Wyświetlenia
292
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

The pegs print better with support (20% line), but you really shouldn't need support for top oval section of windows. I don't suggest my print speed, I would tone it down to 75mm/s, I had a lot of stringing at this speed. 

Basket Specs:

The total depth from front to pegboard is 32mm, and wall thickness is 1.2mm. 

DescriptionInner (mm)Outer (mm)
Width83.686
Height100102.4
Depth (basket)25.628

 

Printer SettingValue
Print Speed100 mm/s
Travel Speed150 mm/s
Build Plate Temp50 C
Infill20%
Fan Speed20%
Layer Height0.20 mm
Print Temperature220 C
MaterialOverture PLA

Tagi