Liczymy pasujące modele…
DND Character tokens including classes: Artificer, Barbarian, Bard, Cleric, Druid, Fighter, Gun Slinger, Monk, Paladin, Ranger, Rogue, Sorcerer, Warlock, and Wizard and some factions. Meant for a 1in battle grid (you may need to scale…
GREASE RANGE HOOD FILTER 11inch x 11.25inch (actual size) It won't work as an air filter. But great temporary replacement if your filter is super dirty and clogged. Sloped to one side so that grease will run down to one side.
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
Screw-attach mast supports for a 1" PVC pipe. Designed for ham radio, but could be useful for other things.
-PETG -no support -50% infill Note: Kinda big, but fits well. 2024/02/07, MN
Bench dogs designed for 1" holes in a workbench to stop a work piece from sliding around. Can be used with or without the nut but I have found when planing that sometimes they will tilt a bit.
Print vertically, preferably in ABS for extra strenght. Uses M3 Bolts and T-nuts for attaching to M-LOK rail “v2” version - scaled down by 10x because I made an oopsie. Now the size is correct.
Designed these as I ran out of washers for my hurricane shutters, so I designed these! They work just like regular shutter washers. These perfectly withstood the winds from Hurricane Milton printed with PLA @100% infill. NOTE: ONLY…
An organizer for (6) 1" Screwdrivers, pegboard pegs are set for 1" spaced pegboards.
Ironing board replacement feet to protect floors from scratches (fits ~1 inch steel tube legs). Prints OK at 0.3mm. Slight scale adjustment may be needed depending on the tolerances with respect to a particular ironing board.
I found a fan filter clip that WOULD work really well if it wasn't made for significantly larger filters than are on the market. I remixed it to support a wider range of filter sizes and be less fragile. It works GREAT in PETG. It's…
A set of drawer organizers designed to fit in an 18x18x1 drawer Larger Drawer: 9x9x1in Smaller Drawer: 9x6x1in
To make this model, you will need glue and cardboard. Cut a piece of cardboard (mine was about 2.8mm thick) to the size of frame you have printed. The cardboard creates a stable backing for the picture you put in the frame. Using the…
Fits SKU 303-3xx(x). 2u x 3u, 5u tall. Dial indicator not included. Created with the Fusion Gridfinity Generator .
A simple 1inch / 25mm “B” size ball mount in the style of a RAM mount. It screws into the “big thread” holes on a multiboard, and can be locked in place with the included nut(s)
This lets you use a 1 inch square tube and a 22mm pipe together as a sliding linear locking mechanism. For furniture usage, such as with adjustable height legs or table segments. Requires: a 1 inch square tube (1 mm wall thickness) a 22mm…
SAFETY NOTICE: This involved sharp object. Please be careful when handling this item. We take no responsibility for injuries that may occur from using this. Use at your own risk. This tool is designed to cut 1in x 18in Tourniquet rolls in…
Base holds a Starrett micrometer for safe measuring of delicate watch parts that would be risky by handholding a micrometer. Printed in PLA for an older Starrett mic 496-1in. I can't promise it will fit other/all Starrett models. Includes…
print Quantity PBB prt A 1 PBB prt B 2 All parts should be printed flat on the build plat no sports part A Should be folded then glued along the seams using 2 of part B to hold wile the glue sets. Part B is keyed to accept part A. Both…
Ram mount adapter for common phone mounts. Print 2 and glue. Theirs an aliment pin on each ball I didn't make them big enough but they should still work if you drill them out a little. I just use a little superglue to join the 2 halves.
A simple card to wrap 1in tape such as duct tape or first aid tape around for camping/backpacking. Saw the design for 2in tape by Victor Maker and used it as a basis to make my own. Created with TinkerCAD, the tape area is 28mm tall and…
Made a servo tester with a 0-91in OLED and here's the 3d printed boxes for both variants. For 4USD+shipping I'll ship a PCB and code. Depending on what I have components wise I might ship buttons, connectors etc also for a bit extra.…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
Since West Coast Products currently (February 2022) lists their 1x2 tube plugs as out of stock until March (which is too late for this build season), I made an alternative optimized for printing. The holes are made to fit EZ-lok 10-32 x…
After printing Singh Design's Tape Dispenser Automatic Tape Cutter model, I realised that I could not fit my desired 26mm (1") Scotch tape roll on the original roller. This new wheel and psuedo-bearing replace the original wheel, and can…
Pass through and plug for 1in hole. Includes slot to apply to already ran wires. Drill a 1in hole and shove your US power cord through messing it up. There is a trim ring that will try to hide the mess.
Remix of @jbehler_2645718 's safety gate adapter to work with a 1" square steel banister. Adjusted the hole shapes to print more round on a 3D printer (model holes designed as tear drop shapes as opposed to circles) BOM: 2x M4x16 screws…
These are some pretty simple dice i made in onshape. Previously I had printed them in resin but they can be printed in anything.
A printable 1" ball compatible with standard 1" ball socket systems for auto, marine, and underwater photography, etc. Uses M6 hardware (not ¼-20.)
I took cyrulean's design, and separated them into individual files, because reasons. Also made them longer, because having the rollers only 2 squares long sucks to use. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This is a parametric design so it can be adapted to other diameters and Fork widths BOM: Some M3 Screws and Nuts 3x 20mm + nuts 1x 25mm + nuts OnShape Link Fully adjustable. Enjoy Uploaded Version is for 53mm Fork Diameter and a 215mm…
Just needed some cable management on my work bench. Currently running a mouse and keyboard wire but could add more.
SSD1306 OLED Display Reference Model (0.91") A simplified, accurate 3D reference model of the popular SSD1306 0.91 inch OLED display. Perfect for CAD work and designing custom enclosures without having to measure the actual component! How…
I needed to clean up my tools, I hate the generic pegboard screwdriver holders everyone uses I liked a model mad by @kwfredeen but it wouldn't work for my snap on screwdrivers and hose pullers so I redesigned his/her design to work.These…
Printed on a small-bed printer (see photos), slow down printing to 80% for the front frame. Use a cable like this :…
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
Printing 2 of these rod holders should fit on any rod 1in or smaller. Rods smaller than 1 inch will wiggle a little. When ataching to the wall i mounted one first then treded the curtain on the rod while it was in the mount and then…
Propeller cowling; I made one myself since no one else designed one, and I'm sharing it here. Specifically for 1s 1in FPV. Three-hole and four-hole screw holes are already pre-drilled.
I made 3 different-sized caps for these sized pipes: 1/2in, 3/4in, and 1in They fit onto the pipes really well and are decently tight, but these are not waterproof unless you use PVC pipe glue. Very strong and doesn't cost much filament…
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
Print with 20% infill and 4 walls. Use small flathead countersunk screws to fasten to board.
PVC foot extender for 1" OD PVC. I use this to raise up my Vivosun hydroponics system so it can clear a 5 gallon bucket Category: 3D Printing
Screw-attach mast supports for a 1" PVC pipe. Designed for ham radio, but could be useful for other things.
Made for IAC WorkBenches, 1 in PVC tube and 1in Steel tube. Source files included.
The mount is designed to fit an iPad with a case and stylus perfectly. It can also be used with a smaller tablet, but in that case, the tablet won’t be secured as firmly. You’ll need a few metal bolts, washers, and nuts to assemble it.
This is my take on existing stand for the Elecrow CrowPanel 2.1" display. I've rotated the mount holes to make my display vertical but this might just be a manufacturing variance. Happy to provide a vertical aligned mount if that is…
This is a basic 25mm ball mount with 2 m5 holes to attache it to something. I added a hole to install a m4 bolt for added support.
An anchor point to use with a 1in weight plate. I use this as an anchor point for the end of my ham radio antennas.
I made a simple frame for my 11in. by 14 in. F1 posters. The poster can inserted through a gap located at the top of the frame and the frame corners are held together through printed clips. For holding the frame to the wall I used a…
Recommended Printer Settings PLA or PTEG 15%-30% infill
This is a custom Gridfinity bin used to store the Quinn 11in shop shears which are sold at Harbor Freight. The bin is available in a single piece or in two pieces to aid in printing on smaller printers. 3x7 grid units. The shears /…
This is a standard optics clamp with a slot for 1/4''-20 screw. It's designed to be non-magnetic and non-conductive so that it can be used in the vicinity of a SERF magnetometer. Compatible non-magnetic optomechanical parts:…
I made a new one because I needed to customize it... and added I the 123dx file too. Print Settings Printer: BigBox 1.1 Dual Rafts: No Supports: No Resolution: 0.35 Infill: 15% Category: Organization
Welcome to the Universal Chassis! This chassis was created to fit the needs of LCVT, a club dedicated to making custom lightsabers from scratch. All the more recently built sabers found on their website use this exact chassis. The main…
This is a corner bracket with one side sized for 1in extrusion and the other for 3030 extrusion. The posts fit perfectly snug in their respective extrusion and they prevent any twisting quite well. Prints best in the default orientation,…
1" movement steppers for Warmachine miniatures game. Regular steppers have text inset into them. Extruded steppers have text and a border extruded. Both are setup for color changes at ~2.2mm
Print Settings No supports 4~ perimeters. 15% percent infill. Printed with PLA
Print Settings: 0.4mm nozzle 0.2mm layer-height Material: different colors recommended TPU would be ideal, but PLA is fine too About 3MF: Before the file format is criticised again: In PrusaSlicer you can open or import a 3MF file. There…
Connect a 1 inch and a 1/2 inch garden hose to an IBC tank outlet. I use it to connect the input from the rain collector and an output without having to drill any extra holes in my IBC or having extra external T-connectors. The angle…
After getting sick of never being able to find a pen or remember where I put my measuring tape, I designed this holder to keep them together in one spot. Then I added hexagonal speed holes because hexagon. I can provide it with cutouts…
When I'm doing endless sanding on a project in the garage, I like to be able to veg out and watch a show on my phone which normally results in my phone falling over due to vibration and then getting covered in dust. MyTechFun designed a…
Mount a 1in furnace filter to a box fan for simple cheap air scrubber. Good for allergy season or light floating particulates in the shop Screw or rivet 3 mounts in place and you can easily slide a 20x20x1 (or whatever size you require)…
Tips for printing: Print it solid Use M2 screws and threaded inserts 4x M2x4mm screws 4x M2x16mm screws 8x M2x3x3mm Brass threaded inserts. Use 6 5mm lengths of 1.75mm filament to line up the two halves of the rear loop piece and then…
girlfriend loves star wars and has plugs, so i made these, i did it in abs, and uses asetone to smooth the part that rides in the ear and to make the two parts one. worked very well, current size is one inch or 24mm, size accordingly to…
Here is a link to the CAD: https://cad.onshape.com/documents/c6dbc3d6433bca696258d866/w/54d51c44b96ec7cce082f748/e/0325a5e5995a94b8c2d8da66?renderMode=0&uiState=63e95df58178855d47cc2581 Whole robot CAD:…
I needed a very long siphon vacuum to reach the bottom of my very tall fish tanks. I had some 1 inch clear pvc and a length of siphon hose. It has a slight taper fit similar to normal PVC fittings. You may need to scale it up or down a…
SImple Overhang and calibration tester (1in) hole is .5 in
Simple 45RPM record adapter to put your 1inch minatures on I've made this record adapter to hold miniatures with a 1inch diameter base, such as DnD miniatures and the like. The inside is 25.5mm, to not make the fit too tight. I quickly…
Stuff If I was one of my dogs, I figured it would get annoying having two collars overlapping and rubbing against my neck, so I designed this holder to encapsulate the door trigger device and attach it to their 1in collars. Originally my…
This bracket accepts 1 in dowels that can be found at your local hardware store. Make sure to grab an all 'murican hot dog on your way out to show those metric junkies what real 3D printer nerds store their filament with. Note: This model…
I needed something for block small nature parts on water suface in my garden barell.
Basic picatinny/weaver one piece scope rings for 1in, 30mm, and 34mm tubes. Height options range from 16mm to 38mm as measured from top of rail to center of ring in 1mm increments. Available in text and no-text versions. One 25mm M3 bolt…
1in manual sanding blocks for different grits. Block is intended to be used with velcro adhesive bots or double sided tape to attach sanding discs. Dimensions 22mm x 50mm Model with no grit callout was added.
A 1" to .75" hose/pipe reducer with shoulders. Modeled in Onshape.
This is it. Likely the longest vacuum adapter you can print on a Mini. 57mm ID on one end and 25.4mm(1in) OD on the other. For use on the Mini and Mini+ you'll need to print at approximately a 45 degree angle in both axis. Pair with my…
6 different size cups for the Husky 11in organizer. I have made half sized cups that can be stacked on top of each other as well as full sized. I make these because I have small hardware parts in quantities that wouldn't fill up an entire…
Tripod designed to support a tree in my house. I use 25mm wooden dowels. The hole is 25.4mm for clearance so a 1inch dowel can fit. Category: Household
Simple tool to validate 1in minimum bend radius on fiber optic cables.
Brackets to create a paper towel holder using a 1in diameter piece of PVC pipe. You'll need to print 2 pieces, one mirrored. You'll also need a piece of 1in diameter PVC pipe (I cut mine at 13in), and 4 #8 wood screws for mounting.
These are some leading and trailing Edge Wing attachments for 1 inch foam board. I've always been terrible at trying to shape foam board by hand, this makes it a lot easier. Just print out however many you need and glue it straight onto…
This is a remix from https://www.printables.com/model/527256-screw-tainer. I resized the original model so it would fit aReliance-branded water jug. I also removed the bottom, so it could be used to connect it to a 1 inch pvc pipe. 100%…
Organizer for 1inch disk sander. This organizer has a separated space for when I forget which disk I'm currently using. If it's fine with you, toss me a dollar or two to power up with caffeine by…
1in Corner Indexing Jig I quickly designed up to uniformly mount hangers on large plaques I make. Printed on Bambu Lab P1S Stock PLA .2 Strength Profile Took approximately 25min with printer startup sequence Reach out if you have any…
remixed to a 2 part design to help with optimized print orientation. this fits the large 1in or 25mm auto siphons Category: Parts
a template tool for measuring AOE spells and distances for the 1inch system.
I needed spacers to accommodate 4mm rigid vinyl plank flooring, but with enough height to catch drywall with a 1/2in gap
This is a remix just of the Batterie cradle, to fit some cheap batterie contacts
Friend needed a extender for his DnD tokens because they moved sometimes and bigger monsters needed a bigger footprint for visual reasons. Made this quickly printed and tested and worked without a problem.
Remix of the tape dispenser by Miguel M. to use dowels and have slots for guide
You will need a 35mm M5 screw and an M5 nut in order to attach it to a head. Printed with ABS and with supports. OnShape link:…
Compatible with Ram mount B size mounts. Split into 2 parts for easier printing. Uses an M5 screw for added strength. Included onshape project is all parameter based. TotalLength - Total length of the extension. Length is from the top of…
This cable grommet fits a 1in drilled hole and will accommodate a thickness of a couple mm. I created it to use with a fogger system I'm building that is part of mushroom grow tent. This grommet allows the power cable for the fogger to…
Trays for one inch and two inch cylindrical spanner wrenches. Keep them in place and not rolling around in the drawer. Also provides a home to identify when one is missing.
