P
Printables
Elecrow CrowPanel 2.1inch-HMI ESP32 Rotary Display 480*480 IPS Round Touch Knob Screen
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
Search results: 1in
Counting matching models…
P
Printables
Mil/USMC Compatible 1in Buckles for Packs/Slings
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
P
Printables
1in PVC Mast Support
Screw-attach mast supports for a 1" PVC pipe. Designed for ham radio, but could be useful for other things.
P
Printables
1in Wire Shelf / Rack Clip
-PETG -no support -50% infill Note: Kinda big, but fits well. 2024/02/07, MN
P
Printables
1in Bench Dogs
Bench dogs designed for 1" holes in a workbench to stop a work piece from sliding around. Can be used with or without the nut but I have found when planing that sometimes they will tilt a bit.
P
Printables
Low Profile 1in M-LOK Flashlight holder
Print vertically, preferably in ABS for extra strenght. Uses M3 Bolts and T-nuts for attaching to M-LOK rail “v2” version - scaled down by 10x because I made an oopsie. Now the size is correct.
P
Printables
1in x 1.5in Key-Hole Washer for Hurricane Shutters/Panels
Designed these as I ran out of washers for my hurricane shutters, so I designed these! They work just like regular shutter washers. These perfectly withstood the winds from Hurricane Milton printed with PLA @100% infill. NOTE: ONLY…
P
Printables
1in Screwdriver Pegboard Organizer
An organizer for (6) 1" Screwdrivers, pegboard pegs are set for 1" spaced pegboards.
P
Printables
Ironing board feet (for 1in. legs)
Ironing board replacement feet to protect floors from scratches (fits ~1 inch steel tube legs). Prints OK at 0.3mm. Slight scale adjustment may be needed depending on the tolerances with respect to a particular ironing board.
P
Printables
Lasko Box fan 1in filter clip
I found a fan filter clip that WOULD work really well if it wasn't made for significantly larger filters than are on the market. I remixed it to support a wider range of filter sizes and be less fragile. It works GREAT in PETG. It's…
P
Printables
Drawer Organizers 9x9x1in and 9x6x1in
A set of drawer organizers designed to fit in an 18x18x1 drawer Larger Drawer: 9x9x1in Smaller Drawer: 9x6x1in
P
Printables
Picture frame 1.0 (8.5x11in and 9x12in)
To make this model, you will need glue and cardboard. Cut a piece of cardboard (mine was about 2.8mm thick) to the size of frame you have printed. The cardboard creates a stable backing for the picture you put in the frame. Using the…
P
Printables
Shars 1in Dial Indicator Gridfinity Case
Fits SKU 303-3xx(x). 2u x 3u, 5u tall. Dial indicator not included. Created with the Fusion Gridfinity Generator .
P
Printables
1in 25mm Ball Mount for Multiboard - threaded
A simple 1inch / 25mm “B” size ball mount in the style of a RAM mount. It screws into the “big thread” holes on a multiboard, and can be locked in place with the included nut(s)
P
Printables
Adjustable height furniture leg lock - 1in square tube with 22 mm round tube
This lets you use a 1 inch square tube and a 22mm pipe together as a sliding linear locking mechanism. For furniture usage, such as with adjustable height legs or table segments. Requires: a 1 inch square tube (1 mm wall thickness) a 22mm…
P
Printables
Tourniquet Cutter (1in) - Mask Band Cutter
SAFETY NOTICE: This involved sharp object. Please be careful when handling this item. We take no responsibility for injuries that may occur from using this. Use at your own risk. This tool is designed to cut 1in x 18in Tourniquet rolls in…
P
Printables
Base for Starrett 496-1in micrometer for watchmakers
Base holds a Starrett micrometer for safe measuring of delicate watch parts that would be risky by handholding a micrometer. Printed in PLA for an older Starrett mic 496-1in. I can't promise it will fit other/all Starrett models. Includes…
P
Printables
Peg Board 1in/25.4mm hole spacing
print Quantity PBB prt A 1 PBB prt B 2 All parts should be printed flat on the build plat no sports part A Should be folded then glued along the seams using 2 of part B to hold wile the glue sets. Part B is keyed to accept part A. Both…
P
Printables
1in to 17mm ball adapter
Ram mount adapter for common phone mounts. Print 2 and glue. Theirs an aliment pin on each ball I didn't make them big enough but they should still work if you drill them out a little. I just use a little superglue to join the 2 halves.
P
Printables
1in Duct Tape Holder Card
A simple card to wrap 1in tape such as duct tape or first aid tape around for camping/backpacking. Saw the design for 2in tape by Victor Maker and used it as a basis to make my own. Created with TinkerCAD, the tape area is 28mm tall and…
P
Printables
Servo Tester with 0.91in OLED
Made a servo tester with a 0-91in OLED and here's the 3d printed boxes for both variants. For 4USD+shipping I'll ship a PCB and code. Depending on what I have components wise I might ship buttons, connectors etc also for a bit extra.…
P
Printables
Orange - 1inch Dowel Yoke - BuildingBlocks
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
P
Printables
Vex Pro 2x1x0.1in Tube Plug
Since West Coast Products currently (February 2022) lists their 1x2 tube plugs as out of stock until March (which is too late for this build season), I made an alternative optimized for printing. The holes are made to fit EZ-lok 10-32 x…
P
Printables
26mm/1in Scotch Tape Adapter for Singh Design's Tape Dispenser Automatic Tape Cutter
After printing Singh Design's Tape Dispenser Automatic Tape Cutter model, I realised that I could not fit my desired 26mm (1") Scotch tape roll on the original roller. This new wheel and psuedo-bearing replace the original wheel, and can…
P
Printables
1in Circular Pass through
Pass through and plug for 1in hole. Includes slot to apply to already ran wires. Drill a 1in hole and shove your US power cord through messing it up. There is a trim ring that will try to hide the mess.
P
Printables
Safety Gate Adapter - 1in Square Bannister
Remix of @jbehler_2645718 's safety gate adapter to work with a 1" square steel banister. Adjusted the hole shapes to print more round on a 3D printer (model holes designed as tear drop shapes as opposed to circles) BOM: 2x M4x16 screws…
P
Printables
D20 dice simple (1in, 1.5in, and 2in tall)
These are some pretty simple dice i made in onshape. Previously I had printed them in resin but they can be printed in anything.
P
Printables
1in Ball for M6 hardware
A printable 1" ball compatible with standard 1" ball socket systems for auto, marine, and underwater photography, etc. Uses M6 hardware (not ¼-20.)
P
Printables
1in and 1.25in grid rollers
I took cyrulean's design, and separated them into individual files, because reasons. Also made them longer, because having the rollers only 2 squares long sucks to use. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
P
Printables
1Inch Ball Phone Mount for SBK Stansions
This is a parametric design so it can be adapted to other diameters and Fork widths BOM: Some M3 Screws and Nuts 3x 20mm + nuts 1x 25mm + nuts OnShape Link Fully adjustable. Enjoy Uploaded Version is for 53mm Fork Diameter and a 215mm…
P
Printables
Cable Guide 1in Hole
Just needed some cable management on my work bench. Currently running a mouse and keyboard wire but could add more.
P
Printables
Simplified SSD1306 0.91in Model (For Reference)
SSD1306 OLED Display Reference Model (0.91") A simplified, accurate 3D reference model of the popular SSD1306 0.91 inch OLED display. Perfect for CAD work and designing custom enclosures without having to measure the actual component! How…
P
Printables
Snapon screwdriver 1in pegboard mount
I needed to clean up my tools, I hate the generic pegboard screwdriver holders everyone uses I liked a model mad by @kwfredeen but it wouldn't work for my snap on screwdrivers and hose pullers so I redesigned his/her design to work.These…
P
Printables
iPad pro 1st gen 11inch Wall-mount
Printed on a small-bed printer (see photos), slow down printing to 80% for the front frame. Use a cable like this :…
P
Printables
Elecrow CrowPanel 2.1inch-HMI ESP32 Rotary Display 480*480 IPS Round Touch Knob Screen
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
P
Printables
1in Curtain Rod Holder
Printing 2 of these rod holders should fit on any rod 1in or smaller. Rods smaller than 1 inch will wiggle a little. When ataching to the wall i mounted one first then treded the curtain on the rod while it was in the mount and then…
P
Printables
1in FPV Quadcopter Propeller guards
Propeller cowling; I made one myself since no one else designed one, and I'm sharing it here. Specifically for 1s 1in FPV. Three-hole and four-hole screw holes are already pre-drilled.
P
Printables
PVC Pipe Caps 1/2in 3/4in 1in
I made 3 different-sized caps for these sized pipes: 1/2in, 3/4in, and 1in They fit onto the pipes really well and are decently tight, but these are not waterproof unless you use PVC pipe glue. Very strong and doesn't cost much filament…
P
Printables
Mil/USMC Compatible 1in Buckles for Packs/Slings
Includes 2 widths, free end and loop end versions. 25mm fits 1in webbing found on most tactical gear, assault packs, main packs, plate carriers, etc. 30mm fits Vickers and similar slings. Also included is a Sling Adjuster Clip which seems…
P
Printables
Cleats for hanging shelfs of 1in bulletin board
Print with 20% infill and 4 walls. Use small flathead countersunk screws to fasten to board.
P
Printables
PVC 1in OD Foot Extender
PVC foot extender for 1" OD PVC. I use this to raise up my Vivosun hydroponics system so it can clear a 5 gallon bucket Category: 3D Printing
P
Printables
1in PVC Mast Support
Screw-attach mast supports for a 1" PVC pipe. Designed for ham radio, but could be useful for other things.
P
Printables
IAC WorkBench - Spool Rack 1in PVC / 1in Steel Tube
Made for IAC WorkBenches, 1 in PVC tube and 1in Steel tube. Source files included.
P
Printables
Holder for iPad Pro 11inch 3rdGen. w/case & Pencil
The mount is designed to fit an iPad with a case and stylus perfectly. It can also be used with a smaller tablet, but in that case, the tablet won’t be secured as firmly. You’ll need a few metal bolts, washers, and nuts to assemble it.
P
Printables
Stand for Elecrow CrowPanel 2.1inch-HMI ESP32 Rotary Display 480*480 IPS Round Touch Knob Screen
This is my take on existing stand for the Elecrow CrowPanel 2.1" display. I've rotated the mount holes to make my display vertical but this might just be a manufacturing variance. Happy to provide a vertical aligned mount if that is…
P
Printables
25mm/1in ball mount with m4 reinforcment
This is a basic 25mm ball mount with 2 m5 holes to attache it to something. I added a hole to install a m4 bolt for added support.
P
Printables
1in Weight Plate Anchor Point
An anchor point to use with a 1in weight plate. I use this as an anchor point for the end of my ham radio antennas.
P
Printables
11in x 14in Poster Frame
I made a simple frame for my 11in. by 14 in. F1 posters. The poster can inserted through a gap located at the top of the frame and the frame corners are held together through printed clips. For holding the frame to the wall I used a…
P
Printables
Pegboard Display Pedestal For 1in/25.4mm&20mm Pegboards
Recommended Printer Settings PLA or PTEG 15%-30% infill
P
Printables
Harbor Freight Quinn 11in Shop Shear Gridfinity Bin
This is a custom Gridfinity bin used to store the Quinn 11in shop shears which are sold at Harbor Freight. The bin is available in a single piece or in two pieces to aid in printing on smaller printers. 3x7 grid units. The shears /…
P
Printables
Optical post clamp 1in Newport/Thorlabs - compatible
This is a standard optics clamp with a slot for 1/4''-20 screw. It's designed to be non-magnetic and non-conductive so that it can be used in the vicinity of a SERF magnetometer. Compatible non-magnetic optomechanical parts:…
P
Printables
Headphone hook for 25mm (~1inch) table plate
I made a new one because I needed to customize it... and added I the 123dx file too. Print Settings Printer: BigBox 1.1 Dual Rafts: No Supports: No Resolution: 0.35 Infill: 15% Category: Organization
P
Printables
"Universal" 1in Lightsaber Chassis
Welcome to the Universal Chassis! This chassis was created to fit the needs of LCVT, a club dedicated to making custom lightsabers from scratch. All the more recently built sabers found on their website use this exact chassis. The main…
P
Printables
30mm to 1in Corner Bracket for Aluminum Extrusion
This is a corner bracket with one side sized for 1in extrusion and the other for 3030 extrusion. The posts fit perfectly snug in their respective extrusion and they prevent any twisting quite well. Prints best in the default orientation,…
P
Printables
WMH 1inch Steppers
1" movement steppers for Warmachine miniatures game. Regular steppers have text inset into them. Extruded steppers have text and a border extruded. Both are setup for color changes at ~2.2mm
P
Printables
Hooks for doors or lumber (Customizable) 1in
Print Settings No supports 4~ perimeters. 15% percent infill. Printed with PLA
P
Printables
Label Rings for 1in/25mm Grid Miniatures (TTRPGs like D&D)
Print Settings: 0.4mm nozzle 0.2mm layer-height Material: different colors recommended TPU would be ideal, but PLA is fine too About 3MF: Before the file format is criticised again: In PrusaSlicer you can open or import a 3MF file. There…
P
Printables
IBC tank dual hose connector 1in and 1/2in
Connect a 1 inch and a 1/2 inch garden hose to an IBC tank outlet. I use it to connect the input from the rain collector and an output without having to drill any extra holes in my IBC or having extra external T-connectors. The angle…
P
Printables
Pen and Measuring Tape 1in Pegboard Holder
After getting sick of never being able to find a pen or remember where I put my measuring tape, I designed this holder to keep them together in one spot. Then I added hexagonal speed holes because hexagon. I can provide it with cutouts…
P
Printables
1in Pegboard Hangers for MyTechFun's geared phone holder
When I'm doing endless sanding on a project in the garage, I like to be able to veg out and watch a show on my phone which normally results in my phone falling over due to vibration and then getting covered in dust. MyTechFun designed a…
P
Printables
Box Fan 1in Furnace Filter Brackets
Mount a 1in furnace filter to a box fan for simple cheap air scrubber. Good for allergy season or light floating particulates in the shop Screw or rivet 3 mounts in place and you can easily slide a 20x20x1 (or whatever size you require)…
P
Printables
Wheelchair AirTag Mount - 25mm/1Inch Tube
Tips for printing: Print it solid Use M2 screws and threaded inserts 4x M2x4mm screws 4x M2x16mm screws 8x M2x3x3mm Brass threaded inserts. Use 6 5mm lengths of 1.75mm filament to line up the two halves of the rear loop piece and then…
P
Printables
1inch death star plug
girlfriend loves star wars and has plugs, so i made these, i did it in abs, and uses asetone to smooth the part that rides in the ear and to make the two parts one. worked very well, current size is one inch or 24mm, size accordingly to…
P
Printables
Arducam Mount for 1in Box tube FRC 2877
Here is a link to the CAD: https://cad.onshape.com/documents/c6dbc3d6433bca696258d866/w/54d51c44b96ec7cce082f748/e/0325a5e5995a94b8c2d8da66?renderMode=0&uiState=63e95df58178855d47cc2581 Whole robot CAD:…
P
Printables
Aquarium Siphon Adapter 1in PVC
I needed a very long siphon vacuum to reach the bottom of my very tall fish tanks. I had some 1 inch clear pvc and a length of siphon hose. It has a slight taper fit similar to normal PVC fittings. You may need to scale it up or down a…
P
Printables
Simple Overhang and calibration tester (1in)
SImple Overhang and calibration tester (1in) hole is .5 in
P
Printables
1in figure stand 45 record adapter
Simple 45RPM record adapter to put your 1inch minatures on I've made this record adapter to hold miniatures with a 1inch diameter base, such as DnD miniatures and the like. The inside is 25.5mm, to not make the fit too tight. I quickly…
P
Printables
High Tech Pet - Automatic Dog Door Collar Tag : 1in (25mm) Collar Mount
Stuff If I was one of my dogs, I figured it would get annoying having two collars overlapping and rubbing against my neck, so I designed this holder to encapsulate the door trigger device and attach it to their 1in collars. Originally my…
P
Printables
DND Class Tokens for 1in Battle Grid
DND Character tokens including classes: Artificer, Barbarian, Bard, Cleric, Druid, Fighter, Gun Slinger, Monk, Paladin, Ranger, Rogue, Sorcerer, Warlock, and Wizard and some factions. Meant for a 1in battle grid (you may need to scale…
P
Printables
1in Dowel Spool Storage Bracket
This bracket accepts 1 in dowels that can be found at your local hardware store. Make sure to grab an all 'murican hot dog on your way out to show those metric junkies what real 3D printer nerds store their filament with. Note: This model…
P
Printables
Nut 1inch with grid - for garden water barell
I needed something for block small nature parts on water suface in my garden barell.
P
Printables
1in/30mm/34mm Scope Rings
Basic picatinny/weaver one piece scope rings for 1in, 30mm, and 34mm tubes. Height options range from 16mm to 38mm as measured from top of rail to center of ring in 1mm increments. Available in text and no-text versions. One 25mm M3 bolt…
P
Printables
1in Diameter Sanding Block
1in manual sanding blocks for different grits. Block is intended to be used with velcro adhesive bots or double sided tape to attach sanding discs. Dimensions 22mm x 50mm Model with no grit callout was added.
P
Printables
1in to .75in hose/pipe reducer
A 1" to .75" hose/pipe reducer with shoulders. Modeled in Onshape.
P
Printables
Vacuum Nozzle Adapter 57mm ID to 25.4mm(1in) OD
This is it. Likely the longest vacuum adapter you can print on a Mini. 57mm ID on one end and 25.4mm(1in) OD on the other. For use on the Mini and Mini+ you'll need to print at approximately a 45 degree angle in both axis. Pair with my…
P
Printables
11in Husky Organizer Cups
6 different size cups for the Husky 11in organizer. I have made half sized cups that can be stacked on top of each other as well as full sized. I make these because I have small hardware parts in quantities that wouldn't fill up an entire…
P
Printables
Tripod for 25mm or 1inch dowel
Tripod designed to support a tree in my house. I use 25mm wooden dowels. The hole is 25.4mm for clearance so a 1inch dowel can fit. Category: Household
P
Printables
1in Bend Radius Tool
Simple tool to validate 1in minimum bend radius on fiber optic cables.
P
Printables
Paper Towel Holder (using 1in PVC)
Brackets to create a paper towel holder using a 1in diameter piece of PVC pipe. You'll need to print 2 pieces, one mirrored. You'll also need a piece of 1in diameter PVC pipe (I cut mine at 13in), and 4 #8 wood screws for mounting.
P
Printables
RC 1in Foam board Wing Attachments
These are some leading and trailing Edge Wing attachments for 1 inch foam board. I've always been terrible at trying to shape foam board by hand, this makes it a lot easier. Just print out however many you need and glue it straight onto…
P
Printables
Reliance Aqua-Tainer to 1in Pipe Adapter
This is a remix from https://www.printables.com/model/527256-screw-tainer. I resized the original model so it would fit aReliance-branded water jug. I also removed the bottom, so it could be used to connect it to a 1 inch pvc pipe. 100%…
P
Printables
dremel 1inch disk sander organizer
Organizer for 1inch disk sander. This organizer has a separated space for when I forget which disk I'm currently using. If it's fine with you, toss me a dollar or two to power up with caffeine by…
P
Printables
1in Corner Indexing Jig
1in Corner Indexing Jig I quickly designed up to uniformly mount hangers on large plaques I make. Printed on Bambu Lab P1S Stock PLA .2 Strength Profile Took approximately 25min with printer startup sequence Reach out if you have any…
P
Printables
1in racking cane auto siphon holder
remixed to a 2 part design to help with optimized print orientation. this fits the large 1in or 25mm auto siphons Category: Parts
P
Printables
dnd measurement tool 1inch system
a template tool for measuring AOE spells and distances for the 1inch system.
P
Printables
Laminate flooring installation spacers (4mm flooring, 1in tall)
I needed spacers to accommodate 4mm rigid vinyl plank flooring, but with enough height to catch drywall with a 1/2in gap
P
Printables
Batterie cradle for Universal 1in Lightsaber
This is a remix just of the Batterie cradle, to fit some cheap batterie contacts
P
Printables
DnD token extender 1inch to 2inch
Friend needed a extender for his DnD tokens because they moved sometimes and bigger monsters needed a bigger footprint for visual reasons. Made this quickly printed and tested and worked without a problem.
P
Printables
Modular 1in Tape Dispenser (Dowels)
Remix of the tape dispenser by Miguel M. to use dowels and have slots for guide
P
Printables
Quadlock 1in ball mount
You will need a 35mm M5 screw and an M5 nut in order to attach it to a head. Printed with ABS and with supports. OnShape link:…
P
Printables
1in Dual ball extender
Compatible with Ram mount B size mounts. Split into 2 parts for easier printing. Uses an M5 screw for added strength. Included onshape project is all parameter based. TotalLength - Total length of the extension. Length is from the top of…
P
Printables
Screw Fastening Cable Grommet for 1in Hole
This cable grommet fits a 1in drilled hole and will accommodate a thickness of a couple mm. I created it to use with a fogger system I'm building that is part of mushroom grow tent. This grommet allows the power cable for the fogger to…
P
Printables
1in and 2in cylindrical spanner wrench holder
Trays for one inch and two inch cylindrical spanner wrenches. Keep them in place and not rolling around in the drawer. Also provides a home to identify when one is missing.
P
Printables
Series 25 (25mm / 1in) Aluminum Extrusion Handle (8020 / 2020 / 2525)
Two piece handle for Series 25 (25mm / 1in) Aluminum Extrusion Uses two 16mm M6 flathead screws Included step file incase you need to make changes. My hards are on the small side. I printed it upright, and on the side. And I think the…