92mm PC fan vent/duct adapter - 4 inch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for 92mm PC/case fan. Adapts it to 4 inch duct/vent
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 291
- Makes
- 0
- Views
- 1,507
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I printed it for my noctua 92mm fan so I can connect it to a 4 inch vent/duct. This model doesn't need any support. I tested fitting on my Noctua NF-B9 redux-1600 PWM.
There are two models. The one marked “4 inch adapter” is what you want to print if you want both sides to be connected to a 4 inch vent.
The other model “connector to adapter” is only useful if you want to chain it up with first model itself. For example, you can chain multiple fans up this way. Make sure you select the right model to print.
To be able to install it on the fan, you can use M3 bolts/nuts or even M4. The diameters of the holes are 4mm.