1 / 4
92mm PC fan vent/duct adapter - 4 inch — zdjęcie 1
1 / 4

92mm PC fan vent/duct adapter - 4 inch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter for 92mm PC/case fan. Adapts it to 4 inch duct/vent

Ocena
0 / 5
Polubienia
39
Pobrania
291
Wydruki
0
Wyświetlenia
1507
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I printed it for my noctua 92mm fan so I can connect it to a 4 inch vent/duct. This model doesn't need any support. I tested fitting on my Noctua NF-B9 redux-1600 PWM.

 

There are two models. The one marked “4 inch adapter” is what you want to print if you want both sides to be connected to a 4 inch vent.

The other model “connector to adapter” is only useful if you want to chain it up with first model itself. For example, you can chain multiple fans up this way. Make sure you select the right model to print.

 

To be able to install it on the fan, you can use M3 bolts/nuts or even M4. The diameters of the holes are 4mm.

Tagi