1 / 2
Ethernet Switch Wall Mount Bracket [DLink DES-105; 58mm Pitch, 3mm Studs]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple wall mount bracket for the DES-105 switch. Should fit other devices with 58mm pitch wall mount holes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 32
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple wall mount bracket for the 5 port ethernet switch DES-105 by DLink. It should fit other devices with keyhole shaped wallmount mechanism and 58mm pitch for 3mm (or less) studs).
I suggest printing at 100% infill to increase the strength of the studs. I designed them with an elliptical base shape to increase strength. However low infill can be too weak at the intersection to the base plate.
I attached it with VHB tape to the surface but you can easily drill some holes for attachment via screws.