Ethernet Switch Wall Mount Bracket [DLink DES-105; 58mm Pitch, 3mm Studs]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall mount bracket for the DES-105 switch. Should fit other devices with 58mm pitch wall mount holes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple wall mount bracket for the 5 port ethernet switch DES-105 by DLink. It should fit other devices with keyhole shaped wallmount mechanism and 58mm pitch for 3mm (or less) studs).
I suggest printing at 100% infill to increase the strength of the studs. I designed them with an elliptical base shape to increase strength. However low infill can be too weak at the intersection to the base plate.
I attached it with VHB tape to the surface but you can easily drill some holes for attachment via screws.