1 / 4
Ergotron LX Series: Microphone Boom Arm Adapters — image 1
1 / 4

Ergotron LX Series: Microphone Boom Arm Adapters

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows a microphone boom arm to be fitted to the existing desk pole

Rating
0 / 5
Likes
18
Downloads
88
Makes
0
Views
687
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — Share Alike

Replaces the original plastic cap on the Ergotron LX series pole mount to allow fitting of a microphone boom arm. Various models: 

  • 14mm for Rode
  • 15mm for Elgato
  • 17mm for Sensic

Print top side down without supports. This part will take quite a lot of stress on an extended arm so at least 3 walls, 50% infill. I've used PA6 Nylon here but PETG/ABS/ASA would probably work too. PLA will creep over time so is not recommended!

IMPORTANT: When fitting, place the adapter into the Ergotron pole first; the bottom section of the adapter is designed to expand once the mic arm is inserted to provide a tight grip with no wobble.

CHANGELOG:

06 Oct 2024 - Added flexiblilty to lower sections to avoid cracking between layers. Updated fit tolerances. 

22 Mar 2025 - Added Sensic and Rode adapters

Tags