Ergotron LX Series: Microphone Boom Arm Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows a microphone boom arm to be fitted to the existing desk pole
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replaces the original plastic cap on the Ergotron LX series pole mount to allow fitting of a microphone boom arm. Various models:
- 14mm for Rode
- 15mm for Elgato
- 17mm for Sensic
Print top side down without supports. This part will take quite a lot of stress on an extended arm so at least 3 walls, 50% infill. I've used PA6 Nylon here but PETG/ABS/ASA would probably work too. PLA will creep over time so is not recommended!
IMPORTANT: When fitting, place the adapter into the Ergotron pole first; the bottom section of the adapter is designed to expand once the mic arm is inserted to provide a tight grip with no wobble.
CHANGELOG:
06 Oct 2024 - Added flexiblilty to lower sections to avoid cracking between layers. Updated fit tolerances.
22 Mar 2025 - Added Sensic and Rode adapters