1 / 13
Ender 3 v2 Belt Tensioner Bodies - Replacment Parts — image 1
1 / 13

Ender 3 v2 Belt Tensioner Bodies - Replacment Parts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made this as I was unable to find an X-Tensioner Body replacement part.

Rating
0 / 5
Likes
7
Downloads
46
Makes
0
Views
240
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I made this as I was unable to find an X-Tensioner Body replacement part on Thingiverse though I have needed one for some time. I think this worked out to be a pretty straight forward, drop-in replacement part with no customization needed for either axis. I also included a my fairly basic knobs, designed to work with M4x7mm heat inserts as well as some simple slot covers.

NOTE: I would recommend putting a washer between the spring washer and plastic on the screw on the back of the X-axis as spring washers tend to dig into plastic.

I remixed bastelgarage's Y-Tensioner Body slightly to include a cut out slot similar to the stock part. I was unable to remove the fillets so from the Y-Tensioner so I included a filleted X-Tensioner Body as well as a chambered one that more closely resembles the stock part.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 v2

**Rafts:**

No

Supports:

Yes

**Resolution:**

0.14mm

Infill:

20-30%

**Filament:** Duramic PLA+ Black

Notes:

I strongly suggest printing with a 2mm shell to ensure that the part can stand up to the stresses it will be put under. I used four 0.5mm lines at 0.14mm layer heights.

You should not need supports on the X-Tensioner Body as I have designed the hole to print well without them but you will need supports on the Y-Tensioner Body. I recommend tree supports with a 0.24mm gap.

Post-Printing =============

Removing Supports

You may need to trim the branch that supports the opening of the slot but after that the supports should be fairly easy to remove.

Category: 3D Printer Parts

Tags