1 / 4
Creality Ender 3 KE 5015 Fan Adapters for Sunon Maglev — image 1
1 / 4

Creality Ender 3 KE 5015 Fan Adapters for Sunon Maglev

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed to fit Sunon Maglev 5015 blower fans. Added thickness to use heat set inserts. Added lower hole for left mount.

Rating
0 / 5
Likes
12
Downloads
45
Makes
0
Views
635
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial
  1. Install the heat set inserts.
  2. Install the 2 adapter plates first to the KE cover.
  3. Install the right fan only with M3 screws. The mounting plate does not interfere with the KE cover installation.
  4. Connect the right fan connector to the board. Running the wires like the original wiring is best. Let the cover dangle while you're doing this step.
  5. Install the KE cover. You will need to install the right lower bolt by hand before tightening it with the allen wrench.
  6. Attach the left side fan and connect to board.

While you can use lock nuts, it's a lot nicer to use the heat set inserts and easier to mount the fans.

Tags