1 / 4
Creality Ender 3 KE 5015 Fan Adapters for Sunon Maglev — zdjęcie 1
1 / 4

Creality Ender 3 KE 5015 Fan Adapters for Sunon Maglev

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed to fit Sunon Maglev 5015 blower fans. Added thickness to use heat set inserts. Added lower hole for left mount.

Ocena
0 / 5
Polubienia
12
Pobrania
45
Wydruki
0
Wyświetlenia
635
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
  1. Install the heat set inserts.
  2. Install the 2 adapter plates first to the KE cover.
  3. Install the right fan only with M3 screws. The mounting plate does not interfere with the KE cover installation.
  4. Connect the right fan connector to the board. Running the wires like the original wiring is best. Let the cover dangle while you're doing this step.
  5. Install the KE cover. You will need to install the right lower bolt by hand before tightening it with the allen wrench.
  6. Attach the left side fan and connect to board.

While you can use lock nuts, it's a lot nicer to use the heat set inserts and easier to mount the fans.

Tagi