1 / 11
Elegant hanger NO DRILLING
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of an elegant hanger that can be glued to a door or a cupboard with double-sided tape. It is simple.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Elegant hanger V1
Description
Simple model of an elegant hanger that can be glued to a door or a cupboard with double-sided tape. Not recommended for the wall. The model contains one hook, which has a small recess at the back for double-sided tape. I recommend to use the attached gcode.
Print Instructions
- Material: Use PETG or harder for best strength and durability. This model is optimized for PETG to ensure top performance and quality. I used “Prushament PETG Signal White”
- Print standing up: for better strength, print standing up as recommended by gcode
- Layer height: I recommend a layer height of 0.2 mm, but you can use other settings but the quality and smoothing to print speed ratio may be worse
- Fill: recommend between 20-40%, when higher the hook is heavy
- Supports: set everywhere