1 / 11
Elegant hanger NO DRILLING
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of an elegant hanger that can be glued to a door or a cupboard with double-sided tape. It is simple.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Elegant hanger V1
Description
Simple model of an elegant hanger that can be glued to a door or a cupboard with double-sided tape. Not recommended for the wall. The model contains one hook, which has a small recess at the back for double-sided tape. I recommend to use the attached gcode.
Print Instructions
- Material: Use PETG or harder for best strength and durability. This model is optimized for PETG to ensure top performance and quality. I used “Prushament PETG Signal White”
- Print standing up: for better strength, print standing up as recommended by gcode
- Layer height: I recommend a layer height of 0.2 mm, but you can use other settings but the quality and smoothing to print speed ratio may be worse
- Fill: recommend between 20-40%, when higher the hook is heavy
- Supports: set everywhere