1 / 10
P-51 MUSTANG WIND SPINNER
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print > Connect the parts > Tie it anywhere > Have Fun!
- Rating
- 4.875 / 5
- Likes
- 287
- Downloads
- 858
- Makes
- 10
- Views
- 4,609
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
LAST UPDATES
- The PINS are renamed.
PRINT SETTINGS
- INFILL = 5%
- WALL LAYERS = 2
- TOP/BOTTOM LAYERS = 2
- SUPPORTS = NO
- BRIMS = NO
ASSEMBLY
- Paint the parts before assembly (DO NOT paint TABS, ROD, and ROTOR)
- Insert 3 small tabs into the back of the BODY part
- Connect the TAIL to the BODY
- Insert the ROTOR part into the PROP part
- Connect the PROP to the BODY
- Insert 1 large tab into the TAIL
- Connect ELEVATORS to the TAIL
- Insert 2 small tabs to the WINGS separately
- Connect WINGS to the BODY
- Tie the TIE_POLE anywhere you want by using its extensions
- Connect the whole assembly to the TIE_POLE
SUGGESTIONS
- Please leave a review
- You may print all the parts at the same time, it needs at least 200x200mm print bed
- You may use a different pole with a 3mm or 4mm diameter
- You may use the simple pole and zip ties instead
- You may use super glue to make the assembly stronger