1 / 4
Thermometer case / Obal na rtuťový teploměr
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective case for a personal medical glass mercury themometer.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 85
- Makes
- 2
- Views
- 262
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model will fit Czech/Slovak Exatherm thermometers with tip diameter of 4,5mm and overall length 12,8cm. Oval body 12x9mm.
Inside features a centering hole and tapered edges.
The top cover is a snug fit, if your printer tolerances are too loose, you may need to rescale the top ver very slightly.
Printing instructions:
- PLA or PETG is OK
- you need to print:
- 1x TOP
- 1x BOTTOM
- print both models STANDING UP → I highly recommend to use a minimum 5mm brim
Version history:
v1.0
14.8.2024
- first release