1 / 5
D-Sub or D38999 Locator/Positioner for HD-2612 crimp tool — image 1
1 / 5

D-Sub or D38999 Locator/Positioner for HD-2612 crimp tool

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A crimp locator/positioner for the IWISS HD-2612 deutsch crimper for use with machined D-sub contacts (MIL-C-39029)

Rating
0 / 5
Likes
3
Downloads
12
Makes
0
Views
184
Reviews
0

Updated at source:

Model information

Category
Tools
License
GNU General Public License v3.0

There are two different designs here. The main model requires a small spring (I used a ¼"x13/32" spring from a Harbor Freight assorted spring set) and a #2-56 screw. The positioner can be moved up to make inserting the contact easier. The bottom circle of the contact holder should be snapped off, and is only there to ensure the part is stable when printing.

The alternate simple version does not require any other hardware and should be less fragile, but it is harder to insert contacts.

I used a small drill bit to widen the hole. Too big and the contact will fall in, too small and it will be very difficult to insert into the hole. I would recommend a 1.9mm drill bit.

Use a modifier shape to add fuzzy skin to the parts you need to turn, as seen in the photo.

Tags