QUICK-CLIP (GEN 3) Kevlar Line Roll Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for a 100 ft roll of emma kites 150lb Kevlar line. Roll dimensions are approx. 71.5mm OD 26mm ID 17.5mm thickness.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Simple mount for a 100ft roll of emma kites 150lb Kevlar line, or any other similarly shaped object. Roll is retained with one of the standard locking pins. Can mount donut shaped things with a max. OD of 71.5mm, min. ID of 26mm, and max thickness of 17.5mm, although it will probably work best with an object of very similar dimensions.
Initially printed out of ASA using a 0.4mm nozzle, 0.2mm layer height, 0.4mm line width. Recommend using at least 2-3 walls, at least 3 top/bottom layers. You may have to flip the model about the top plane; the correct orientation should have no overhangs.