1 / 2
OMP M2 Evo Open Nose Canopy - Thicker Sides
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The canopy designed by SeanSean but with slightly thicker sides for strength. Also TPU grommets to glue into the canopy.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 137
- Makes
- 0
- Views
- 528
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
To print the canopy, print it vertically with the nose on your bed. I used slim tree supports and it worked out very well. For info, I printed the canopy at 0.16mm layer height and the grommets at 0.2mm layer height. Use 3 perimeters or walls for each. This will make them solid so % infill will not matter. I used crazy glue to attach grommets to the canopy…put the grommet lip on the outside of the canopy.