Counting matching models…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
This ultra-compact mini whistle is designed for maximum efficiency with minimal material use. Weighing only 0.6g and printing in just 4 minutes , it delivers an impressive 100 dB sound output (measured via smartphone app). Perfect for…
9 ¾ train platform sign I designed from Harry Potter Studios / Hogwarts Express Few ways it can be mounted: - Mounted to a wall etc with screws - Can be used with Ikea Skadis - Can embed magnets see the remix to embed magnets . Make a…
This model is compatible with the lego system.
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
this is a lego technic frame i designed to easily fit a locking differential in for lego technic, which is whats in the (kinda bad) pictures, but it can be used in many other ways I'm sure. can be printed in filament or resin
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
this is a remix from this: https://makerworld.com/en/models/463132?designId=463132#profileId-371619 I finally decide to remix a deadpool head so to use it my dummies. I was testing all the heads out there but seems to be compatible with…
Nothing more to add. You can modify the size of the cornerpieces easily in the 3mf file, if you have any problems fitting these into your pax komplement. Have fun and keep printing
Fruit Fly Trap / Fruchtfliegenfalle English The 3D-printed fruit fly trap is an effective and user-friendly solution to get rid of pesky fruit flies. It consists of three main parts: the canister, the trap, and the lid. These parts are…
Reimagine your Qbrick System with modular compartments to elevate your storage and organisation experience. Precision-engineered and built to integrate seamlessly into your Qbrick setup, these sturdy compartments bring style and…
There is a twin model that does not have a hidden compartment: https://www.printables.com/model/989143-david You will need to add supports on the head. I let PrusaSlicer figure out where they needed to be and used organic type supports.…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I made these wall mounts to hold…
After measuring my wrist size according to apple's website it suggests either size watch would be ok so that doesn't really answer my query . Personally I would prefer to test fit to give me an idea on size comparison hard to do if you…
Removed the SD card slots for 12x more MicroSD card slots. Only the 0.4mm tolerance non-stackable version remixed. This is a remix of nerdpersonthing's Hinged SD / microSD Card box ( Printables ), which is in turn a remix of fugalster's…
We started demolition on our bathroom for a remodel after the kids went to bed and found that one of our sink valves had gone out and was dripping. It's after midnight, the stores are closed. So... I looked up the schematics on a cap,…
This is a rugged, 20cm diameter loop designed for high-speed stunts and aggressive play. It features an extra-thick base for superior stability, ensuring the track doesn't tip or wobble when cars hit the apex. Key Features: Large…
This model is compatible with the lego system.
A remix of NeilW's excellent modular drawer divider system that exploits cheaper material (hardboard / plywood) for the walls and uses printed parts for the connectors. Instructions: Cut your walls from your choice of sheet goods: I used…
25. Aug. 2024, V1.0: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Someone on MakerWorld kindly asked me to design some cheerleader stuff as her…
Overview This is a modular snap-fit connector designed specifically for 3D printed parts and CAD workflows . The main goal of this model is to provide a ready-to-use connector that you can directly import into your own designs, without…
Charging socket Bosch Smart Code: 998018800
Welcome to my Feedback Sensor for MMU's ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward…
This one is pretty self explanatory. It's a hammer! Use it to tap, persuade, nudge, peck, or even slam printed components together without damaging them. Includes both a large and small flat face for various use cases. I printed it with…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) TRAVELLER SCREW CAP BOX –…
Spool auto rewinder with metal spring adjustable sliding clutch compact design placed within spool adjustable width for spools between 67 and 128 mm 103 mm (see updates 20.07.2026 and 22.07.2026) intended for the limited space within the…
A foldable 24 inch ruler intended for use with Battletech: Alpha Strike and similar games. Designed from scratch to be more compact than https://www.printables.com/model/1544863-foldable-wargaming-ruler but with length obviously the same.…
OpenScad file and STL files to print 4 compartments for primaSelect or easyPrint spools, will add more spool and improve on the design as time move forward. Print instructions use 0.2 layer, spiral vase or spiralize outer contour
For an additional tabelsoccer point set or replacement of the old one.
Update: Doing post processing is very much worth it! A good printer, spray filler and a top coat, sanded to a 1500 grit finish creates a mirror finish. This is probably the easiest/fastest way to make a stabilizer since it only needs a…
I needed a way to hold my "wiring closet" components (switches, modems, power strips, power adapters) to my MultiBoard wall with MultiConnect connectors. I originally made this Fusion model to be screwed in, but then I found…
no supports, replace for missing or broken cap, M18 1.25 thread inside Category: Sport & Outdoors
A two part case to keep your one up steerer tube threading tool kit organized.
Meet your new desktop buddy! I originally designed this little guy as a gift for a programmer friend, but he turned out too cool not to share. Whether you're fixing a critical bug at 3 AM or just need someone to listen to your code logic…
EDIT (20/15/26): Tolerance adjustment and removed geometry for easy printing This is a miniature storage box with compliant spring latches. the whole system is fully 3d printable. The box holds 12 miniatures, each with a 25mm base. The…
CALLING ALL VORON USERS! TEST YOUR SEAM SKILLS WITH THE VORON SMOOTH CUBE! THIS test cube is NOT made for checking dimensional accuracy but to test your seam skills We all have little tricks of the trade to hide those seams to get that…
Keycap compatible with the wireless Logitech k400r keyboard. I split this keycap into two parts so the connector can be printed lying down because otherwise it wants to catch on the keyboard forcing the user to press in the center of the…
This is a model of the coliseum in pompeii.
Layer Height: 0.2mm Material used: PLA I recommend to scale all parts if it does not fit into the build plate at once. To assemble: Snap the lid into the base
This is the component Kit to utilize a DX Commander Signature 9 Mast to make your own Fan Dipole. Check out my Youtube page for the Video explaining how to make one. 30 infil PETG, or better ASA make sure it is not CF or carbon fiber
This is a fully 3D printed upgrade for the waterfall in Life of the Amazonia. I really should sell this one, but I want as many people to enjoy it as possible because I spent a lot of time on it. While there are many fun things that could…
An improved version of my G2 pen which can be found here: https://www.printables.com/model/491413-pen-pilot-g2-gel-capped The edges were widened to reduce the need for a brim The clip was shortened to make it more robust. Tolerences…
Filter support two options. The cover is made from TPU95A, provides a friction fit.
I was using a Windows laptop for running OctoPrint but it was taking up so much space that I decided to install OctoPrint on an Intel Compute Stick. All the benefits of my Windows 10 laptop in a very tiny package. I wanted to mount it out…
My 15-year-old son is a springboard diver and occasional competitive swimmer. He had a competition today and I realized he's just accumulating his place ribbons on his desk. I wanted to give him a way to display them. Dimensions: These…
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos). More infos under https://www.perrypedia.proc.org/ This is not a spaceship. It is a timemachine. The no-decompression deformer was…
I found the collars on watercooling compression fittings really difficult to tighten using thick zmt tubing, so If you have soft girly hands like me, you might like these thumb wrenches. The short one is really optional, but it makes it…
Compact, print in place storage box for the ThermalMaster P3. Model uses 3x5mm magnets by default. Printed in ABS / 0.08mm Layer height, magnets fits tight (no need for glue) Box is print in place. Way more compact than the default…
Gehäuseteile zu jeweils einem Stück zusammengeführt. Gehäuse schraubbar. Andere Lüftungeslöcher. Liegende Bauform. Zusätzlich werden 6x M3x8 Zylinderschrauben DIN912 und 6x ruthex M3x5,7 Gewindeeinsätze benötigt.
its a 4090 case for a framework mainboard computer case i would love to win the competition i modeled the make body of the 4090
I designed this for the random components that come in plastic/divided cases that I wish had a standardized form factor. Limits: only has 12 divisions per drawer with a height based on the shell dimensions (see below). Small drawer-based…
This is a box with 4 compartments openable by a rotation. The dimensions are 15 x 15 cm Really easy to print. Be gentle when closing it, no force needed. The nut has to be loose but tight enough. And it works better horizontaly. Supports:…
This is a remix of https://www.printables.com/model/22338 I bought different springs that did not compress as much as the original (2.5mm longer than the original https://www.aliexpress.com/item/1005006006967590.html specifically using…
Eigene Version des Framework Computer Mainboard Gehäuse
My son's scooter grips were gettign sun rotted so we printed up some new ones using 95A TPU. They work great. The fit is very tight (22mm ID) but that is what you want so they don't move anywhere. Also you should be able to scale it just…
FIRST Robotics Competition (FRC) Rapid React Logo
This is a holder for the battery compartment of these LED fairy lights. We have these light for different occasions like Halloween, eastern or Christmas, and because we didn't want to make a permanent attachment of the battery compartment…
The attachments of your IKEA PAX KOMPLEMENT bar broke? No problem, this is your replacement. The original screws fit. You have to place the attachment on both sides of the bar before you mount them (with the original attachment, you slide…
My daughter wanted a compass for her figurines. I printed it with resin.
The main difference is that I extended the stem 10mm so that the pug mount sits back further. I didn't like how sharply you had to bend the tool-head connector to plug it in on the original. I also cut one of the corners off to make its…
A unique 3D printable creation — this Complete Accessibility Aids Bundle of 9 complete 3D printable model packages. Save $29.92 (67% OFF) compared to buying individually! **Models Included:** - Faucet Lever Extension - Light Switch…
I wanted to Josh's shelf system to create shelving for Kuggis boxes, and since I stacked them up pretty tall, I needed to connect two of the uprights together. I wasn't satisfied with the current connector design, because I figured it…
Of course, choosing components this massive has nothing to do with any personal insecurities about height or size. Not at all. It's purely about achieving maximum thermal dissipation and unparalleled visual dominance in your build. Who…
Models to print a new replacement grip for the handle of a Comptometer and for a new reset button. After printing, sand smooth and paint, two or three layers will create a shiny smooth surface. Because the finished item should have a…
Iskra Delta Computer was a Slovenian computers manufacturer mostly known for making Iskra Delta Partner computer and Iskra Delta Triglav/Trident. They were also known for making minicomputers that were based on DEC PDP/VAX.
25/1/26: Added a new back plate that has holes to suit the 8 pin and 6 pin amphenol connectors. 5/1/26: This holds the compact owl, just like the pre-existing enclosure - Download and use Tray.stl from it. I've called this the Subcompcat…
While I love making camera-specific bottom plates and really tiny options to keep in my bag, I've been meaning to make some 'big' versions for a while. These ended up still being quite a bit smaller than my favorite 'real product' arca…
Compact and minimalist filament spool holder designed for 2020 extrusion. Takes up minimal space while remaining strong and stable. Fits spools up to 67 mm width. A separate version is available for 70 mm spools. A STEP file is included…
INTRODUCING SCRAP-ATTACK! Scrap-attack is a battle top designed specifically for the battle top contest here on Printables July 2026. It features a "blade" disk that is made of compression molded printing scraps that you can make with a…
This model is compatible with the lego system.
This model is compatible with the lego system.
A two part case to keep your one up steerer tube threading tool kit organized.
UPDATE: Please print the Updated stl file since some slicers have issues printing the top circle. :)
I have printed all of these at .2 or .15 mm in PETG. Worked well in operation.
I sculpted this body to be a body compatible with smart doll heads, specifically meant to resemble a trans masculine person, because that's a representation I don't see a lot in the bjd hobby. This is the first body I've sculpted and so…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
“Embark on a journey through the cosmos with the Cosmic Compass bookmark, a tool for those who seek not just knowledge, but understanding. As you navigate the pages of discovery, this bookmark serves as a reminder that the universe is not…
pratico tool per la facile rimozione dei rompigetto dei lavandini
This model is compatible with the lego system.
Good day, dear friend. You can find two versions of the tray. In version 2.0, the destruction and sick people chips are combined with the sick people figures, I found it more convenient. But there is also a place for the destruction and…
This is a 1/10th scale compressor and rattle gun for the workshop as decoration or other. The rattle gun is Snap On style and would usually be red and comes with a 55mm nut that would usually by black, the compressor is made as to be…
Holds your Ryobi 4v batteries, or USB Lithium batteries, or Milwaukee INKZALL Large markers to a Link rail Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern…
These inserts are designed to store the Lords of Waterdeep Base game and both Expansions within a single box. The Gold and Victory point box is spring loaded with a light 15mm x 70 mm spring.
EN I designed this sliding cover so that the lights of the Vodafone ConnectBox (Compal CH7465) don't disturb my sleep. Preferably in dark filament so that no light gets through. When attaching it, press it down evenly so that no layer can…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
Adattatore Zburns modificato per stampare senza supporti e con PTEG. Non mi fido del PLA per oggetti come questi che devono essere più scanalati. si prega di usare cautela quando Impostazioni di stampa Marca della stampante : Creatività…
I downloaded some bracket model long time ago and used it as a source for this one, but I can't find the original link. If you see that it's based on your creation – please let me know, I'll add the link. One screw seems to be enough to…
This model is compatible with the lego system.
A friend had a Dewalt job site radio that was missing the latch for the battery cover panel on the back. This one functions the same as the original. It was printed in PLA+ (which is supposed to be more durable than regular PLA, time will…
English: "Compact cap holder, mountable with a 3.5x25mm screw or double-sided tape. Ideal for small spaces." Français : "Support de casquette compact, à fixer avec une vis de 3,5x25mm ou du ruban adhésif double face. Idéal pour les petits…
I thought @t4obrien's case needed a little extra on the front so I added some grooves to break the surface a bit. For all other files please go to the original model and download from there.
I was looking for a stand for my Ampero 2 Stomp and couldn't find one anywhere so I made it. I don't think it will print very well on the side, so I suggest printing it as it stands on the desk - that gives a nice, large adhesion area.
The cover must be printed with support material. It is recommended to use only ASA and a layer height of approx. 0.16 mm.
