Bafang bbshd brake sensor mount tektro auriga comp
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.38 – €0.47 net (excluding VAT)
For file: support sensor bafang10.5 rayon_0.4n_0.2mm_PETG_MK4_33m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.43 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 33 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A shim to be able to mount a magnetic brake sensor on tektro auriga comp brakes
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 63
- Makes
- 0
- Views
- 678
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014.
Je l'ai dessiné car les surfaces plates sur ces freins ne tombent pas en face lorsque j'utilise les cales pour aimant suivants https://www.printables.com/fr/model/651704-magnet-holder-for-bbs02-bbshd-brake-lever-sensors
Imprimé en PETG avec 15% de remplissage sans supports, j'utilise des riselans pour les maintenir
Le fichier .STEP est fournis car je ne sais pas si les capteurs pour BBS01/BBS02 sont similaire
N'hésitez pas à me tagger sur vos remix/fabrications.
Bonne balade
EN: Here is a shim which allows you to mount a magnetic brake sensor supplied by bafang with the bbshd (for hydraulic brakes) Tektro AURIGA comp which was mounted on a Btwin rockrider 520 bike from 2013/2014.
I drew this because the flat surfaces on these brakes don't fall in front when I use the following magnet shims https://www.printables.com/fr/model/651704-magnet-holder-for-bbs02- bbshd-brake-lever-sensors
Printed in PETG with 15% infill without supports. I use zipties to mount it on the bike
The .STEP file is provided because I don't know if the sensors for BBS01/BBS02 are similar
Feel free to tag me on your remixes/productions.
Good ride